Quality Is the Production Line, Not a Folder of Certificates
The tightness of a tank or the load capacity of a chassis is guaranteed by measurement in the factory, not by testing in the field.
Every unit is checked at each stage of production: certificate verification on material intake, ultrasonic inspection after welding, functional testing after assembly and a final inspection before shipment.
The results appear in the test report handed over with the vehicle. Which steel batch was used, which welder worked on it and what each test returned are all on record.
Four-Stage Inspection
01
Material Intake
Certificates for incoming steel and equipment are verified and the batch number is logged in the vehicle file. Uncertified material does not enter production.
02
After Welding
Weld seams undergo ultrasonic (UT) inspection. Tanks and pressure vessels are subjected to hydrostatic or pneumatic pressure testing.
03
After Assembly
Brake, electrical and hydraulic systems undergo functional testing. The chassis is load tested and deformation is measured.
04
Before Shipment
Paint thickness is measured and an adhesion test carried out. A photographic final inspection report is prepared. An independent inspection company is accepted on request.
Our Quality Certificates
Our production is audited against national and international standards. Sample certificates are provided on request.
ADR
Dangerous Goods Transport
Conformity of tanks and tankers carrying dangerous goods with the European agreement.
TSE
Turkish Standards Institution
Certificate of conformity of the production process and product standards with national regulations.
CE
European Conformity Mark
Indicates that the product meets European Union health, safety and environmental requirements.
ISO 9001
Quality Management System
Certified quality management of all processes from design to shipment.
EN 10204
Material Certificate 3.1
Documents the chemical and mechanical properties of the steel used, declared by the producer.
Materials and Tests
Materials
- S700 MC high strength steel — main beam
- S355 structural steel — chassis members
- AISI 304 / 316 L stainless — chemical tank
- Material intake inspection and certificate archive
- Batch-level traceability
Component Sourcing
- Axles and suspension: BPW, SAF
- King pin and landing legs: JOST
- Brake system: WABCO, Knorr-Bremse
- ABS / EBS electronic control
- Tank fittings: certified manufacturer
Tests Applied
- Ultrasonic (UT) weld seam inspection
- Hydrostatic / pneumatic pressure test
- Leak test
- Chassis load test and deformation measurement
- Paint thickness and adhesion test
- Brake and electrical function test
Handed Over with the Vehicle
Test Report
Per-vehicle test and inspection results, plus a photographic final inspection report.
Warranty Certificate
Defines the scope, duration and conditions covering manufacture and workmanship.
User Manual
Operating, periodic maintenance and safety instructions. In English and Arabic on request.
Spare Parts List
With part numbers; needed for stock planning in distant markets.
Certificates
Material certificates, declaration of conformity and any additional documents required by the buyer country.






Request Sample Certificates
If your buyer country’s customs or registration authority requires an additional document, tell us before production and we will build it into the process.